科研团队
- 主要研究方向
- 代表性科研项目
- 代表性科研成果
- 专利
-
1. 复杂氧化物薄膜介电储能与铁电存储;
2. 新型高浓度多主元材料;
3. 材料表面与界面行为、机理研究;
4. 材料辐照效应(损伤、改性);
5. 高场用超导材料;
6. 材料尺寸效应与微纳尺度力学性能测评;
7. 搅拌摩擦焊接;
8. 聚变堆面向等离子体部件关键材料及连接界面的辐照考验、辐照损伤;
9. 金属中的氢行为(扩散、滞留、与缺陷相互作用);
10. 铝合金的空间辐照效应;
11. 硬质合金热处理对材料微结构及性能影响;
12. 新型能源材料;
13. 铜基形状记忆合金;
14. 轻合金及先进中子增殖材料;
15. 材料微观结构及晶体缺陷。
16.辐照下的点缺陷团簇行为;
17.极低温形状记忆合计及其马氏体相变机理研究;
1. 国家自然科学基金:钙钛矿相关功能薄膜的界面及缺陷原子结构;
2. 国家自然科学基金:抗辐照损伤的界面工程的原子机制研究;
3. 国家自然科学基金:过渡金属氧化物薄膜的界面重构及其对称性约束效应
4. 北京市自然科学基金:新型奥氏体耐热钢SP2215的组织结构稳定性及多相强化机理研究;
5. 国家磁约束核聚变能发展研究专项:面向 CFETR 水冷包层模块的整体制造关键技术及验证;
6. 国际热核聚变实验堆(ITER)计划专项:核聚变堆关键材料的辐照损伤机理的基础研究;
7. 国家自然科学基金重点项目:金属材料合金相的早期析出行为的实验与理论研究;
8. 国家重点研发计划重点专项:高性能低温超导线材批量化制备关键技术研究子课题,超导材料极低温变形行为与微观结构研究;
9. 北京市基金面上项目:重离子辐照对钛包钒复合材料连接界面的微观结构和力学性能的影响;
10. 自然科学基金重点项目:放电等离子扩散焊过程中电-热-力复合能场对构件材料及界面的作用机理研究子课题,复合场作用下材料变形的数学力学分析;
11. 国家自然科学基金面上项目:中子辐照初期缺陷与钨材料力热性能、氘滞留行为的关联研究(12175013);
12. 国家自然科学基金青年项目:ITER第一壁部件中Be/CuCrZr与SS316LN/CuCrZr连接界面的辐照损伤研究(51701014);
13. 横向课题:热处理工艺对硬质合金微观组织和力学性能的影响研究;
14. 国家“973”计划,国家磁约束核聚变能发展研究专项:新型铍合金颗粒与制备技术研究;
15. 国家自然科学基金航天联合基金:高精度陀螺仪表关键零组件材料稳定性及调控机理研究;
16. 国家自然科学基金:氦氘协同辐照对金属铍微观结构和辐照硬化的影响;
17. 中国电子科技集团公司第十一研究所:感温弹簧制备;
18. 中国科学院空间应用工程与技术中心:铜基形状记忆合金元件的研发;
19. 中国博士后科学基金:纳米相界面对聚变堆用关键金属材料辐照损伤行为的影响。
20. 国家自然科学基金:纳米晶体的材料辐照损伤机制研究;
21. 国家自然科学基金:固体材料中气泡在电子辐照下的微观结构变化;
1. X.K. Er, F. Shao, S.Z. Diao, H.L. Wang, Q.H. Ma, P.P. Liu, J.X. Zhang, Q. Zhan*, Design, synthesis, microstructure and electrical properties of thermal-strained PZT films, J. Eur. Ceram. Soc., 2021, 41: 5512-5518.
2. X.K. Er, H.L. Wang, P.W. Shao, Q.H. Ma, Y.H. Chu, Q. Zhan*, The microstructure and ferroelectric properties of PbZr0.52Ti0.48O3 films on mica substrates, Ceram. Int., 2021, 47: 9252-9257.
3. Y.F. Zhang, Q Zhan*, S. Ohnuki, A. Kimura, F.R. Wan, K. Yoshida, Y. Nagai, Radiation-hardening and nano-cluster formation in neutron- irradiated 9Cre2W low activation steels with different Si contents, J. Nucl. Mater., 2019, 517: 1-8.
4. Z.Q. Wang, Q. Zhao, Y.P. Wei, P.P. Liu, S.W. Yang, Q. Zhan*, The direct correlation between precipitate-size-dependent strain at the interface and the irradiation hardening in V-4Cr-4Ti, J. Alloy. Comp., 2018, 732: 406-413.
5. Y.M. Zhu, Q. Zhan*, J.C. Yang, Y. Bitla, P.P. Liu, C.I. Li, H.J. Liu, V. S. Kumar, E. Arenholz, Q. He, and Y.H. Chu, Enhanced Structural and Magnetic Coupling in a Mesocrystal-Assisted Nanocomposite, ACS Appl. Mater. Interfaces, 2016, 8: 1104−1111.
6. Han W, Liu Y, Wan F, et al. Deformation behavior of austenitic stainless steel at deep cryogenic temperatures[J]. Journal of Nuclear Materials, 2018, 504: 29-32.
7. Zhang L, Du Y, Han W, et al. An approximate in-situ method for investigating irradiation damage of grain boundary[J]. Nuclear Materials and Energy, 2021, 29: 101056.
8. Han W T, Liu H P, Li B S. Transmission electron microscopy and high-resolution electron microscopy studies of structural defects induced in Si single crystals implanted by helium ions at 600° C[J]. Applied Surface Science, 2018, 455: 433-437.
9. Han W, Liu P, Yi X, et al. Impact of friction stir welding on recrystallization of oxide dispersion strengthened ferritic steel[J]. Journal of Materials Science & Technology, 2018, 34(1): 209-213.
10. Han W, Yabuuchi K, Kasada R, et al. Application of small specimen test technique to evaluate fracture toughness of reduced activation ferritic/martensitic steel[J]. Fusion Engineering and Design, 2017, 125: 326-329.
11. Heavy-ion irradiation and post-irradiation annealing effects in explosion-welded CuCrZr/316LN joints for ITER application, X. Yi*, Y.F. Du, D.C. Geng, et al. Materials Characterization 178 (2021) 111252.
12. Neutron irradiation response of explosion-welded CuCrZr/316LN joints for ITER application, X. Yi*, Y.F. Du, Y.H. Li, et al. Fusion Engineering and Design, 169 (2021) 112620.
13. 金属W中辐照缺陷的产生、演化与热回复机制, 易晓鸥, 韩文妥, 刘平平, 等. 金属学报, 2021, 57(3): 257-271.
14. Defect characterization, mechanical and thermal property evaluation in CVD-tungsten after low-dose neutron irradiation, X. Yi*, L. Zhang, W.T. Han* et al. International Journal of Refractory Metals & Hard Materials 85 (2019) 105004.
15. High-temperature defect recovery in self-ion irradiated tungsten - 5wt.% tantalum, X. Yi*, K. Arakawa, Y.F. Du et al. Nuclear Materials and Energy 18 (2019) 93-98.
16. In situ studies of 150 keV W+ ion irradiated W and W-alloys: Damage production and microstructural evolution, X. Yi*, M.L. Jenkins, M.A. Kirk et al. Acta Materialia 112 (2016), 105-120.
17. P.P. Liu*, S.N. Jiang, Y.F. Du, et al., Point defect mobility in hydrogen pre-implanted vanadium under electron irradiation, Mater. Charact., 174 (2021).
18. P.P. Liu*, L.W. Xue, W. Hu, et al., Mechanical compression behaviors of single phase Be and binary Be12Ti pebbles, Fusion Eng. Des., 144 (2019) 202-208.
19. P.P. Liu*, W.T. Han, X.O. Yi, et al., Effect of He and H synergy on mechanical property of ion-irradiated Fe-10Cr alloy, Fusion Eng. Des., 129 (2018) 221-229.
20. P.P. Liu, R. Yu, Y.M. Zhu, et al., Deuterium ion irradiation induced precipitation in Fe-Cr alloy: Characterization and effects on irradiation behavior, J. Nucl. Mater., 459 (2015) 81-89.
21. P.P. Liu, F.R. Wan, Q. Zhan, A model to evaluate the nano-indentation hardness of ion-irradiated materials, Nucl. Instrum. Meth. B, 342 (2015) 13-18.
22. 万发荣,材料辐照损伤中的点缺陷团簇与一维迁移现象,工程科学学报,2020,Vol.42, No.12, (2020), pp.1535-1541
23. 李然然,张一帆,耿殿程,张高伟,渡边英雄,韩文妥,万发荣,V-4Cr-4Ti/Ti复合材料界面的辐照损伤特性研究,物理学报,Vol.68,No.21,(2019),pp.216101
1. 一种用离子预辐照提高低活化材料抗辐照性能的方法.
2. 一种通过钛钒连接去除钒合金中杂质元素的处理方法.
3. 一种钒合金复合材料及其制备方法
4. 一种利用纳米压痕技术测量材料表面残余应力的方法.